In Jiangyin market, another distribution center, the overall inventory of the current circulation link is about tons, slightly lower than the normal level. At the beginning of this week, the price gap between Jiangyin prices and those in the north has also been able to correspond to the slightly lower circulation inventory. However, from the perspective of the policy port of the steel plant, the overall production situation of Nangang Hengrun, Dada, etc. is relatively normal, and the amount of resources in the later period remains stable. The overall inventory of Lecong market remains at about to tons, which is a medium normal level, and the recent spot price of Lecong market has a large gap with that of the north.
The room temperature tensile strength of the annealed red copper sheet is ~ kgf/mm, the elongation is ~%, and the Brinell hardness (HB) is ~
빌 리 퍼 드Establish the copper pipe pipeline maintenance evaluation specification.
It has excellent conductivity, thermal conductivity, ductility and corrosion resistance.
아 빌Extrusion method: This production method is to cast copper ingots after smelting, and extrude copper tubes by large extruder after secondary heating.
장 & # ;우리는 동관 재료의 장점을 상세히 서술했다: 동관 지온은 뜨거운 물을 열매체로 이용하여 동관 가열관에서 순환하고 바닥을 가열하며, 지면을 통해 복사와 대류 전열 방식으로 바닥을 가열하는 일종의 가열 방법을 말한다.. 동관은 열을 방출하는 효과가 빠르고 내열성이 강하다.고온으로 물을 공급하는 상황에서도 지온관의 사용 수명은 영향을 받지 않는다.둘동관은 금속관이고,o 잘 안 긁혀요.따라서 누설은 쉽지 않다.셋고온에 강하고 고압에 강하며 어떤 일반 플라스틱 파이프에 비해도.동관 바닥은 따뜻하고 고온과 고압에 강하다.사수명이 길다.다섯
The hard copper tube is not artificially treated after being drawn or extruded, so that it can be naturally formed. At this time, the organizational form in the copper tube is full. This kind of copper tube is more likely to crack and is not suitable for bending. Therefore, the hard copper tube is generally straight.
현재의 전체 가격차를 감안할 때, 현지 가격은 여전히 동북과 화중 지역과의 가격차의 우세를 가지고 있다.생산 제한의 영향으로 현지의 후속 상품량이 비교적 적기 때문에 화동 지역 이외의 지역은 뚜렷한 후속 추세가 나타나지 않고 있으며, 현지의 재고 압력은 더욱 낮아질 것이며, 동봉 가격의 지탱은 여전히 강하다.그러나 현재 국내 부동산 통제는 여전히 강화되고 있다.시장 & # ;미래의 수요에 대한 시장의 예상이 약화되고 있습니다.오늘 심양 동봉의 시장 가격이 안정되어 출하량이 좋지 않다.
수질, 수류, 파이프 유량.
In consideration of the above factors, more and more steel plants have stopped production since October, and the production limit in Wuan and Tangshan heating seasons has been advanced. In addition,빌 리 퍼 드2507 스테인리스 강판, the formal implementation of production limit in "+" urban heating seasons after November by steel enterprises, the demand for iron ore in the future is likely to further deteriorate. The iron ore inventory of the steel plant is relatively high and the willingness to further replenish the inventory is not strong. In terms of supply, the fourth quarter is generally the peak period for the shipment of imported ores. Although the production of domestic mines has been reduced due to environmental protection, the quantity of * * * is relatively limited. In general, the short-term iron ore market may lack upward momentum.
포장 하 다.동판, 동봉, 동관의 다섯 가지 주요 응용 분야 중 다섯 가지: 동은 의약에 쓰인다.세기 년대에 중국 의학 발명가 류퉁칭과 류퉁러는 구리가 매우 강한 s를 가지고 있음을 발견하고 해당하는 &를 개발하는 데 성공했다.quot;암 억제 및;“;, 전체 시장은 이미 멈추었다.그 후 시장 심리 상태는 큰 변화가 없었다켄드.가격은 안정적이지만 일부 규격은 협상을 기다려야 하며 협상범위는 ~원 좌우이다.시장의 전반적인 리듬은 안정적이고 냉담하다.겨울 중기에 동북지역의 전체 시장은 전통적인 비수기에 접어들어 전체 시장의 마무리가 무기력하다.모든 회사가 상품을 판매하고 있다.재고 정리로 인해 선양의 재고 수준은 매우 낮으며 모든 건설 현장은 폐쇄되었습니다.저온으로 인한 운송 압력 외에 시장은 참담하다.
antages: low production cost and high production efficiency.
Disadvantages: low output,빌 리 퍼 드주석 도금 적동 막대, high production cost and high price. Extrusion copper tube process is a stable and excellent copper tube production method at home and abroad at present. Only the copper tubes produced by this process are more suitable for the field of heating and ventilation, which is the development direction of copper tube industry in the future.
신용 보증먼저 구리 파이프를 가열하고 용접한 다음 이음매를 가열하여 가열된 부분이 진홍색으로 변할 때까지 가열합니다. 이때 충전 금속이 파이프와 접촉할 때 충전 금속은 용해되어야 합니다.
Therefore, it is often used in some ah heat exchangers to Kazakhstan oxygen equipment.
Copper pipe has the characteristics of, heat supply and refrigeration pipe.
빌 리 퍼 드Save materials and total cost, stability and performance, and can save maintenance.
용접할 때 드라이어는 납관에 수직해야 하고 화염은 련속 이동하여 국부적인 과열과 용접제가 충전금속을 첨가하기전에 탄화되는것을 방지해야 한다.
위생과 건강: 동관에 있는 플라스틱 관의 각종 변성제, 첨가제, 첨가제 및 기타 화학 성분.